ArduCAM CC3200 Board for Energia support MT9D111 Camera Module as Arduino UNO

NT$2,200

貨號: SA000830 分類:

描述

ArduCAM CC3200 Board for Energia support
MT9D111 Camera Module as Arduino UNO


貼心提醒

 
文件


產品特色

TI CC3200 ARM Cortex M4 Processor with WIFI support Arduino UNO
Size and Pin Out Support ArduCAM Standard Camera Interface and
MT9D111 Camera Module Onboard JTAG/SWD Debugger Support Energia
and Code Composer Studio Development Environment – See more at:
http://www.uctronics.com/arducam-cc3200-board-for-energia-support-mt9d111-camera-module-as-arduino-uno.html#sthash.Rfrewklq.dpuf

TI CC3200 ARM Cortex M4 Processor
with WIFI support

Arduino UNO Size and Pin Out

Support ArduCAM Standard
Camera Interface and MT9D111 Camera Module

Onboard JTAG/SWD Debugger

Support Energia and Code Composer
Studio Development Environment

Applications Microcontroller
Subsystem:

    ARM Cortex-M4 Core at 80 MHz

    256KB RAM, 1MB serial flash
memory with file system for user

    Hardware Crypto Engine for
Advanced Fast Security, Including AES, DES, 3DES, SHA2 MD5, CRC and
Checksum

    Up to 27 individually
programmable, multiplexed GPIO pins, including a fast parallel
camera interface, I2S, SD/MMC, UART, SPI, I2C, and four-channel ADC.

Wi-Fi Network Processor Subsystem:

    Dedicated ARM MCU, completely
offloads Wi-Fi and Internet Protocols from the Application
Microcontroller

    11 b/g/n Radio

    WPA2 Personal and Enterprise
Security

    Station, Access Point, and
Wi-Fi Direct Modes

    Powerful Crypto Engine for
Fast, Secure Wi-Fi and Internet Connections with 256-Bit AES
Encryption for TLS and SSL connections

    SmartConfig Technology, AP Mode
and WPS2 for easy and flexible Wi-Fi provisioning

    The power-management subsystem
includes integrated DC-DC converters supporting a wide range of
supply voltages. This subsystem enables low-power consumption modes,
such as the hibernate with RTC mode requiring less than 7 μA of
current

    Easy to use SDK with full APIs
with lots of examples for Energia, GCC,IAR Systemand Ti Code
Composer Studio (CCS)

Pinout:


1.Microcontroller:ATmega2560


2.Operating Voltage:5V


3.Input Voltage (recommended): 7-12V


4.Input Voltage (limits):6-20V


5.Digital I/O Pins:54 (of which 14 provide PWM output)


6.Analog Input Pins: 16


7.DC Current per I/O Pin:40 mA


8.DC Current for 3.3V Pin:50 mA


9.Flash Memory:256 KB of which 8 KB used by bootloader


10.SRAM:8 KB


11.EEPROM:4 KB


12.Clock Speed:16 MHz

– See more at:
http://www.uctronics.com/mega2560-atmega2560-16au-board-2011-arduino-fully-compatible-p-1829l.html#sthash.70RL6b32.dpuf


1.Microcontroller:ATmega2560


2.Operating Voltage:5V


3.Input Voltage (recommended): 7-12V


4.Input Voltage (limits):6-20V


5.Digital I/O Pins:54 (of which 14 provide PWM output)


6.Analog Input Pins: 16


7.DC Current per I/O Pin:40 mA


8.DC Current for 3.3V Pin:50 mA


9.Flash Memory:256 KB of which 8 KB used by bootloader


10.SRAM:8 KB


11.EEPROM:4 KB


12.Clock Speed:16 MHz

– See more at:
http://www.uctronics.com/mega2560-atmega2560-16au-board-2011-arduino-fully-compatible-p-1829l.html#sthash.70RL6b32.dpuf


產品規格

1pcs

Arducam-F Shield V2 Camera module shield with 3.2 inch LCD

– See more at: http://www.uctronics.com/arducam-lf-camera-module-shield-3-2-inch-lcd-for-arduino-uno-mega2560-due.html#sthash.gV769Wo6.dpuf