Arducam Shield V2 with 3.2 inch LCD

NT$2,400

貨號: SA000829 分類:

描述

Arducam Shield V2 with 3.2 inch LCD


貼心提醒

 

含鏡頭模組

Resolution     Sensor Vendor     Camera Module
Manufacture
0.3MP       Omnivision      OV7660 / OV7670 / OV7675 / OV7725 ArduCAM
0.3MP       Aptina        MT9V111
ArduCAM
1.3MP       Aptina        MT9M112 / MT9M001   ArduCAM
2MP        Omnivision      OV2640
ArduCAM
2MP        Aptina        MT9D111 / MT9D112    ArduCAM
3MP        Omnivision      OV3640
ArduCAM
3MP        Aptina        MT9T112
ArduCAM
5MP        Omnivision      OV5640 / OV5642    ArduCAM


ArduCAM Shield V2 Datasheet

Platform       Type
Manufacture
8bit MCU     Arduino UNO / MEGA         Arduino
Cotex-M3     Arduino DUE            Arduino
Cotex-M3    STM32 Develop Board         ArduCAM
ARM       Raspberry Pi B+ / Pi 2 / Pi 3   Raspberry Pi
ARM       BeagleBone Black         BeagleBone
MIPS      ArduCAM Nano ESP8266        ArduCAM


產品特色

Support 0.3MP~5MP camera modules

3.2 inch TFT LCD with touch screen

3.2 inch TFT LCD with touch screen
3.2 inch TFT LCD with touch screen

Build in SD/TF card socket

Support JPEG compression mode,
single and multiple shoot mode, one time capture multiple read
operation, burst read operation, low power mode and etc.

Support almost any microcontroller
platform

Provide open source code library,
please visit 
arducam
github

All ArduCAM’s IO ports are 5V/3.3V
tolerant

Well mated with standard Arduino
boards


1.Microcontroller:ATmega2560


2.Operating Voltage:5V


3.Input Voltage (recommended): 7-12V


4.Input Voltage (limits):6-20V


5.Digital I/O Pins:54 (of which 14 provide PWM output)


6.Analog Input Pins: 16


7.DC Current per I/O Pin:40 mA


8.DC Current for 3.3V Pin:50 mA


9.Flash Memory:256 KB of which 8 KB used by bootloader


10.SRAM:8 KB


11.EEPROM:4 KB


12.Clock Speed:16 MHz

– See more at: http://www.uctronics.com/mega2560-atmega2560-16au-board-2011-arduino-fully-compatible-p-1829l.html#sthash.70RL6b32.dpuf


1.Microcontroller:ATmega2560


2.Operating Voltage:5V


3.Input Voltage (recommended): 7-12V


4.Input Voltage (limits):6-20V


5.Digital I/O Pins:54 (of which 14 provide PWM output)


6.Analog Input Pins: 16


7.DC Current per I/O Pin:40 mA


8.DC Current for 3.3V Pin:50 mA


9.Flash Memory:256 KB of which 8 KB used by bootloader


10.SRAM:8 KB


11.EEPROM:4 KB


12.Clock Speed:16 MHz

– See more at: http://www.uctronics.com/mega2560-atmega2560-16au-board-2011-arduino-fully-compatible-p-1829l.html#sthash.70RL6b32.dpuf


產品規格

1pcs

Arducam Shield V2 with 3.2 inch LCD (含鏡頭模組)

Dimension: 99 x 59 mm

Weight: 50g

1pcs

Arducam-F Shield V2 Camera module shield with 3.2 inch LCD

– See more at:
http://www.uctronics.com/arducam-lf-camera-module-shield-3-2-inch-lcd-for-arduino-uno-mega2560-due.html#sthash.gV769Wo6.dpuf