Stepper motor – NEMA-17 size – 200 steps/rev, 12V 350mA
Coil #1: Red & Yellow wire pair. Coil #2 Green & Brown/Gray wire pair.
200 steps per revolution, 1.8 degrees
Bipolar stepper, requires 2 full H-bridges!
4-wire, 12 inch leads
42mm square body 42 x 42mm
31mm square mounting holes, 3mm metric screws (M3)
5mm diameter drive shaft, 24mm long, with a machined flat
12V rated voltage (you can drive it at a lower voltage, but the torque will drop) at 350mA max current
28 oz*in, 20 N*cm, 2 Kg*cm holding torque per phase
35 ohms per winding
材 質: 多種材料主要為鋼與鋁合金。